I had my Gas compliance done in NSW 2 years ago and now I have to get compliance in WA. The requirement of AS5601 part 2 is to have fixed gas detection with minimum of 2 sensors and solenoid shut off. It also needs a facility to start a bilge blower if deemed not to have adequate ventilation.
Has anyone done this recently and found anywhere you can purchase a full system for under $1000.
We installed a DVK system, all up about $600 with 2 sensors. Nothing said about blower requirement.
www.whitworths.com.au/dvk-monitors-gas-alarm-with-solenoid
Thanks Free Radical
I had a good look around,
I have come to the conclusion Whitworths have lost the Plot. I ended up with a BEP 600-GDL plus additional sensor and solenoid for $450.
www.burnsco.net.au/shop/boating/safety/gas-detectors
Whitworths price for same 3 Items was over $700 and as you said the DVK came in at just over $600.
Now to find out what the gas fitter is going to charge.
Seems many gas detector units use the Figaro 813 head which are available for $9 on the internet. ($82 at some Australian marine online stores).
It is a simple voltage measuring circuit. I am sure that someone like Trek could integrate something into the transponder.
Not sure if the whole of Australia is requiring Gas detectors now or not.http://www.figarosensor.com/products/813pdf.pdf
Unfortunately you need an AGA approved valve so its unlikely that solenoid will pass muster. Also need 2 sensor capability for Australia.
Shows how expensive we really are in Australia.
Ended up buying from NZ good pricing i thought.
