Woo! New site is online - select here to use it!


Forums > Sailing General

Sail cleaning

Reply
Created by southace > 9 months ago, 27 Nov 2012
southace
SA, 4803 posts
27 Nov 2012 11:10PM
Thumbs Up

Any ideas the best way to sails?

Ramona
NSW, 7758 posts
28 Nov 2012 8:55AM
Thumbs Up

southace said...

Any ideas the best way to sails?


I use a soft broom and truck wash on a lawn then haul up in the air and rinse off. I also have a big tub [old marker buoy can] I can soak sails in truck wash. Avoid hard scrubbing, acids or bleach. Rust stains can be removed with careful use of oxalic acid but you risk damaging the sail. It depends a lot on the sail cloth and the filler level. Be cautious.

crustysailor
VIC, 871 posts
28 Nov 2012 10:00AM
Thumbs Up

warm water,wool mix and liquid hand soap.rinse off and be sure 100% dry before folding away

Sunseeker39
WA, 71 posts
29 Nov 2012 3:39PM
Thumbs Up

A mate of mine lost his mast to the bottom of the Swan River with his jib and main, was in fine mud for a couple of weeks, he used a karcher and they came up a treat. That said obviously there were no rust stains.

cisco
QLD, 12365 posts
30 Nov 2012 12:09AM
Thumbs Up

Just got to be careful the Karcher does not rip your stitching apart.

Ramona
NSW, 7758 posts
30 Nov 2012 8:18AM
Thumbs Up

Sunseeker39 said...
A mate of mine lost his mast to the bottom of the Swan River with his jib and main, was in fine mud for a couple of weeks, he used a karcher and they came up a treat. That said obviously there were no rust stains.


Probably soft sails. The problem with a pressure cleaner is it would possibly ruin a hard or heavily resin filled sail. Commercial sail cleaning companies use a tumbler style washer which can have the same effect. Best bet is to treat the sails gently.



Subscribe
Reply

Forums > Sailing General


"Sail cleaning" started by southace