Woo! New site is online - select here to use it!


Forums > Sailing General

Water Ways Vessel Identification Plates.

Reply
Created by cisco > 9 months ago, 7 May 2017
cisco
QLD, 12365 posts
7 May 2017 1:13PM
Thumbs Up

I bought my boat in NSW and it has two of these plates attached. One is on the transom and the other on a bulkhead below.
Questions:-

1. Are these plates relevant in NSW only or are they part of a national vessel I.D. system??

The number on the plate obviously corresponds to a file in an office somewhere.

2. What information would be in that file in regard to the details of the vessel?

I have been on the NSW Roads and Maritime web site and did not see anything about them there.

3. Which would be the office to contact in regard to these plates?

Thanks in advance.

Jethrow
NSW, 1282 posts
7 May 2017 1:26PM
Thumbs Up

I believe they are called HIN plates (Hull Identification Number). I seem to remember back when I first registered my boat one was supposed to go onto the transom and the other was supposed to be hidden somewhere inside. I'm pretty sure I went through Waterways back then so I assume it's the same now.

Jethrow
NSW, 1282 posts
7 May 2017 1:27PM
Thumbs Up

Here we go...
www.rms.nsw.gov.au/maritime/registration/boatcode/index.html

cisco
QLD, 12365 posts
7 May 2017 6:39PM
Thumbs Up

So it is run by Roads and Maritime NSW and it's primary purpose appears to be identification of hulls and the ability to look up on the Personal Property Securities Register to see if there is a financial lien against the vessel similar to a REVS check on a motor vehicle.
Fees for these Boat Code Agents are a bit hefty.

I assume Water Ways is now Roads and Maritime.

Thanks Jethrow.

Harb
WA, 226 posts
7 May 2017 7:40PM
Thumbs Up

Select to expand quote
cisco said..
So it is run by Roads and Maritime NSW and it's primary purpose appears to be identification of hulls and the ability to look up on the Personal Property Securities Register to see if there is a financial lien against the vessel similar to a REVS check on a motor vehicle.
Fees for these Boat Code Agents are a bit hefty


In Aus it Is run by the feds to meet www.iso.org/standard/22932.html but each state administers their own BoatCode providers and sets the maximum fees the agents can charge.





sirgallivant
NSW, 1531 posts
7 May 2017 11:11PM
Thumbs Up

Cisco, l think the short answer is yes.
You got it.
Is it hefty? $86?

Bansha
6 posts
9 May 2017 4:37AM
Thumbs Up

The RMS wont let you transfer a boats registration if it doesnt have this HIN or boat code installed ..

Its a massive pain in the arse when you just want to go for a cruise on your new toy but the owner won't let you until the transfer is complete and the rms wont transfer until you find a boat code agent and then you have to wait another week!!

Mobile boat code was really fast and easy once he was available.. all they want is to see a receipt and dont leave them alone with a drill!!! i had to stop the guy from fixing it with self tappers to my transom!!!

dreamliner
NSW, 110 posts
9 May 2017 9:13AM
Thumbs Up

Isn't this system run by each state but under the control of the Feds , under a national system , a bit like the heavy vehicles
scheme which is now national but run by each state , so laws a regs simplified to an agreed national system.



Subscribe
Reply

Forums > Sailing General


"Water Ways Vessel Identification Plates." started by cisco