Woo! New site is online - select here to use it!


Forums > Windsurfing General

Carbon/Gtx Pre Preg Stock Fin

Reply
Created by Rubby > 9 months ago, 28 Feb 2010
Rubby
65 posts
28 Feb 2010 8:14AM
Thumbs Up

Recently I drove down to Miami and bought an '06 Fanatic Shark 145 which was hardly used. It came with a 50 cm stock fin. I haven't really used stock fins much since I usually buy discounted boards and then purchase an after market fin company product with the money I saved. This time around, I am going to take my time with the fin and give it a good testing before deciding on a new fin to replace it. However, I really didn't think it was up-to-snuff the last session I put in two days ago. It just felt too loose to me. I remember how much I liked the 54 cm Tectonic's Mirage I last used with my 160 liter Naish Icon and how badly the last sailing experience I had with the stock 50cm that came with that board. I was told that the stock fins had improved over the years, but I'm really starting to wonder about that. I put up a message on a U.S. forum regarding the Naish fin and got mixed opinions. Futhermore, although many have claimed that older Mistral fins were crap, I have one which was a shop discard that has served me quite well. The 54 cm fin was matched to a 9.6 camberless sail. The 50 cm I have been using with a 9.0 double cambered sail. I already found a 54cm fin for an affordable price, but I still wonder about this Carbon GTX Pre Preg which just doesn't seem to hold up to my weight and the conditions. Either I try it a few more sessions or I buy the Select Rainbow G-10 Superfoil pointer now. Given the comparative tail widths of the two boards, the 50cm fits the width at the 1 ft from tail mark on the Shark. The two boards are different fin boxes, so I'll never be able to use it. Now, I did buy a new board once that had a select fin that came with it. Don't they usually get into the water as stock fins?

Mrgob
116 posts
28 Feb 2010 8:29AM
Thumbs Up

Check the thread on Boards forum (pre preg fins) by Bigbuoy. (Same poster.)

mineral1
WA, 4564 posts
28 Feb 2010 10:48AM
Thumbs Up

^^^^^^^^

Sunted Jarred and ripped

Rubby
65 posts
28 Feb 2010 8:26PM
Thumbs Up

Zen Koan: How many morons can post on an internet forum?

elmo
WA, 8896 posts
28 Feb 2010 8:37PM
Thumbs Up

Min'ers

Hows the ankle going? hopefully hobbling around a bit quicker

mineral1
WA, 4564 posts
28 Feb 2010 9:35PM
Thumbs Up

elmo said...

Min'ers

Hows the ankle going? hopefully hobbling around a bit quicker


heading in the right direction lots of Physio but them's the breaks
Don't want to rush it, but am I hanging out just float on a board for 1/2 an hour Patience not one of my best attributes

elmo
WA, 8896 posts
28 Feb 2010 10:10PM
Thumbs Up

Ah well, just imagine all the new toys you can get as a welcome back pressy in spring

pueno
19 posts
1 Mar 2010 1:55AM
Thumbs Up

Rubby said...

Recently I drove down to Miami and bought . . . . blah, blah, blah, more blah, blah, blah, and even more Brucie BS . . . . . did buy a new board once that had a select fin that came with it. Don't they usually get into the water as stock fins?

Brucie, you posted this same drivel on other forums. Why do that? In fact, why post your BS at all?

K-100
106 posts
1 Mar 2010 5:23AM
Thumbs Up

Bloody hell Brucie, you get around a bit

Looks like your wasting more of your time posting drivel

Wonder how long it will be before he flips on here just like he always does

Ben 555
NSW, 456 posts
1 Mar 2010 2:10PM
Thumbs Up



Sailing joe / bruce / rubby

dont worry about the fins - just take your heels off it will really add to your sailing ability



Subscribe
Reply

Forums > Windsurfing General


"Carbon/Gtx Pre Preg Stock Fin" started by Rubby